Forums Gallery Downloads LOGIN |REGISTER

Crashing problems

If you have problems with the Sandbox editor or other provided tools, let us know here.


 

Hattoff
Just getting started
Just getting started
 
Posts: 6
Member since: 09.05.2012, 19:43
Likes: 0

Crashing problems

Postby Hattoff » 15.05.2012, 09:35

Hey,

Forgive me for posting this in the wrong place, but I couldn't find where to place it. I am trying to work with the most recent release of the CryEngine 3 SDK 3.4.0 and every time I try and load the level that came with the kit (the forest) my display driver crashes and so does the editor.
I have a Radeon HD 5770 which is going to be replaced this summer, but I would like to use the editor until then. Here is the log that the editor spits out after everything goes to hell. Thanks for any help or redirection to a different forum.

On a side note, I can get the editor to run when a new level is created but when I go into the 'game mode' (CTRL G) the sun rises and sets very quickly, and I can't get it to stop or slow down. Thanks again.


Call Stack Trace:
16) function=0x000007FEE58016DA
15) function=0x000007FEE58013BC
14) function=0x000007FEE5812CCC
13) function=0x000007FEE5812152
12) function=0x000007FEE581992F
11) function=0x000007FEE57FD01E
10) function=0x000007FEE5459B1B
9) function=0x000007FEE5447B7C
8) function=0x000007FEE58273E7
7) function=0x000007FEE5483400
6) function=0x000007FEE547ED4F
5) function=0x000007FEE588AF7B
4) function=0x000007FEE588AF63
3) function=0x000000007699652D
2) function=0x000000007708C521
1) function=0x000000007708C521


Suspended thread (JobSystem_Worker_0(NormalPriority)):
10) function=0x00000000770B135A
9) function=0x000007FEFCB610DC
8) function=0x000000003653F5D9
7) function=0x000000003653F925
6) function=0x00000000365C7477
5) function=0x000000005CD61D9F
4) function=0x000000005CD61E3B
3) function=0x000000007699652D
2) function=0x000000007708C521
1) function=0x000000007708C521


Suspended thread (JobSystem_Worker_1(NormalPriority)):
10) function=0x00000000770B135A
9) function=0x000007FEFCB610DC
8) function=0x000000003653F5D9
7) function=0x000000003653F925
6) function=0x00000000365C7477
5) function=0x000000005CD61D9F
4) function=0x000000005CD61E3B
3) function=0x000000007699652D
2) function=0x000000007708C521
1) function=0x000000007708C521


Suspended thread (JobSystem_Worker_2(NormalPriority)):
10) function=0x00000000770B135A
9) function=0x000007FEFCB610DC
8) function=0x000000003653F5D9
7) function=0x000000003653F925
6) function=0x00000000365C7477
5) function=0x000000005CD61D9F
4) function=0x000000005CD61E3B
3) function=0x000000007699652D
2) function=0x000000007708C521
1) function=0x000000007708C521


Suspended thread (JobSystem_Worker_3(NormalPriority)):
10) function=0x00000000770B135A
9) function=0x000007FEFCB610DC
8) function=0x000000003653F5D9
7) function=0x000000003653F925
6) function=0x00000000365C7477
5) function=0x000000005CD61D9F
4) function=0x000000005CD61E3B
3) function=0x000000007699652D
2) function=0x000000007708C521
1) function=0x000000007708C521


Suspended thread (JobSystem_Worker_4(NormalPriority)):
10) function=0x00000000770B135A
9) function=0x000007FEFCB610DC
8) function=0x000000003653F5D9
7) function=0x000000003653F925
6) function=0x00000000365C7477
5) function=0x000000005CD61D9F
4) function=0x000000005CD61E3B
3) function=0x000000007699652D
2) function=0x000000007708C521
1) function=0x000000007708C521


Suspended thread (JobSystem_Worker_5(NormalPriority)):
10) function=0x00000000770B135A
9) function=0x000007FEFCB610DC
8) function=0x000000003653F5D9
7) function=0x000000003653F925
6) function=0x00000000365C7477
5) function=0x000000005CD61D9F
4) function=0x000000005CD61E3B
3) function=0x000000007699652D
2) function=0x000000007708C521
1) function=0x000000007708C521


Suspended thread (Main):
10) function=0x00000000770B135A
9) function=0x000007FEFCB610DC
8) function=0x000007FEE5492280
7) function=0x000007FEE547FA38
6) function=0x000007FEE54810DA
5) function=0x000007FEE5469EA1
4) function=0x000007FEF5CB40D0
3) function=0x000007FEE690AA97
2) function=0x000007FEE690D01A
1) function=0x00000000187CD251


Suspended thread (Physics):
10) function=0x00000000770B135A
9) function=0x000007FEFCB610DC
8) function=0x000000003657291D
7) function=0x000000003657287F
6) function=0x0000000036668CF9
5) function=0x0000000036667200
4) function=0x00000000365C7477
3) function=0x000000005CD61D9F
2) function=0x000000005CD61E3B
1) function=0x000000007699652D
The Art of War
Developer
Developer
 
Posts: 254
Member since: 05.04.2012, 14:13
Likes: 14

Re: Crashing problems

Postby The Art of War » 15.05.2012, 12:19

By adding this to your system.cfg you can get around the crash although it's just a temporary fix:

Code: Select all
r_GeomInstancing = 0


If you don't want to disable GeomInstancing, you'll have to downgrade to DX9 for the moment:

Code: Select all
r_driver = DX9


(In the same file)


Intel i5-2500K 4x@4.9GHz@EKWB Supremacy Nickel water block
ASUS Maximus IV Gene-Z/Gen3 @Z68
Gigabyte HD 7950 @ 1100MHz/6000MHz@Alphacool NexXxos ATXP water block
24GB Corsair Vengeance 1600MHz CL10
Hattoff
Just getting started
Just getting started
 
Posts: 6
Member since: 09.05.2012, 19:43
Likes: 0

Re: Crashing problems

Postby Hattoff » 16.05.2012, 03:25

The Art of War ... All I can say is thank you so very much! I added the command to the system.cfg file and the level opened up like a dream. If you happen to know, what is GeomInstancing for (just a rough rundown), and what problems might I run into while that is disabled?

Also... Since I am planning to replace my graphics card, any tips on what to buy that will both great for gaming as well as running the CryEngine SDK and engine smoothly... say under or around $400 USD?

Thanks again, such a quick fix but I really appreciate it!
User avatar
Ruan
Has seen it all
Has seen it all
 
Posts: 11741
Images: 0
Member since: 11.07.2008, 20:25
Location: Nottingham, UK
Likes: 93

Re: Crashing problems

Postby Ruan » 16.05.2012, 03:34

Geometry instancing is an optimisation feature that doesn't play nicely with tessellation atm. Nvidia drivers handle the error ok but AMD drivers react in a less than stellar fashion as you've seen.
Out now! CryENGINE Game Programming with C++, C#, and Lua
Ex-Crytek, now with Deep Silver Dambuster Studios
The Art of War
Developer
Developer
 
Posts: 254
Member since: 05.04.2012, 14:13
Likes: 14

Re: Crashing problems

Postby The Art of War » 16.05.2012, 08:40

As Ruan said (because CryTek are using mostly Nvidia..) the CE3SDK runs better with Nvidia drivers, so why not get a GTX570 with ~1 GB VRAM or something?


Intel i5-2500K 4x@4.9GHz@EKWB Supremacy Nickel water block
ASUS Maximus IV Gene-Z/Gen3 @Z68
Gigabyte HD 7950 @ 1100MHz/6000MHz@Alphacool NexXxos ATXP water block
24GB Corsair Vengeance 1600MHz CL10
User avatar
Mizuka
Just getting started
Just getting started
 
Posts: 84
Member since: 25.12.2011, 19:49
Location: Germany
Likes: 0

Re: Crashing problems

Postby Mizuka » 22.05.2012, 01:55

The Art of War wrote:By adding this to your system.cfg you can get around the crash although it's just a temporary fix:

Code: Select all
r_GeomInstancing = 0


If you don't want to disable GeomInstancing, you'll have to downgrade to DX9 for the moment:

Code: Select all
r_driver = DX9


(In the same file)


I added both.
The forest map loads without any problems now.
If I try to create or open up something of my own stuff it doesn't respond anymore when loading.
Any ideas?
The Art of War
Developer
Developer
 
Posts: 254
Member since: 05.04.2012, 14:13
Likes: 14

Re: Crashing problems

Postby The Art of War » 22.05.2012, 07:54

Mizuka wrote:
The Art of War wrote:By adding this to your system.cfg you can get around the crash although it's just a temporary fix:

Code: Select all
r_GeomInstancing = 0


If you don't want to disable GeomInstancing, you'll have to downgrade to DX9 for the moment:

Code: Select all
r_driver = DX9


(In the same file)


I added both.
The forest map loads without any problems now.
If I try to create or open up something of my own stuff it doesn't respond anymore when loading.
Any ideas?


Not really, I'm not a level designer, although if you're running DX9 you don't need to disable GeomInstancing (if it runs in DX9 aswell of course), only in DX11.


Intel i5-2500K 4x@4.9GHz@EKWB Supremacy Nickel water block
ASUS Maximus IV Gene-Z/Gen3 @Z68
Gigabyte HD 7950 @ 1100MHz/6000MHz@Alphacool NexXxos ATXP water block
24GB Corsair Vengeance 1600MHz CL10
User avatar
Mizuka
Just getting started
Just getting started
 
Posts: 84
Member since: 25.12.2011, 19:49
Location: Germany
Likes: 0

Re: Crashing problems

Postby Mizuka » 23.05.2012, 05:00

Currently Im using an older version (3.3.9) which works fine, but id like to use the 3.4.0 with the dx11 ofc... :/
User avatar
Mizuka
Just getting started
Just getting started
 
Posts: 84
Member since: 25.12.2011, 19:49
Location: Germany
Likes: 0

Re: Crashing problems

Postby Mizuka » 23.05.2012, 05:06

YOSH!!
3.4.0 works for me now with dx11!!!
Im not able to create levels with the 3.4.0.
So what I did is create a level in the 3.3.9 and open it up with the 3.4.0!

I got this in my 3.4.0 system.cfg
r_GeomInstancing = 0
It might work without aswell. I didn't tried out yet.


 
Connect and collaborate with CRYENGINE developers in the official Forums.
Visit the Gallery to share what you have created and be inspired by what others are creating with CRYENGINE.
Community